Activate And Test Alarm Origination Feature - Avaya MCC1 Installation And Upgrades

Test Telephones and Other Equipment

Activate and Test Alarm Origination Feature

Activate and Test Alarm Origination Feature
Return to Task List
1
Activate the Alarm Origination feature from the change system-parameter maintenance
form.
2
Type test inads link
Administrator at the Technical Service Center (TSC).
3
Be sure the system is part of the existing INADS database by calling the INADS Database
Administrator to verify the system can be dialed into and that the system can dial out to INADS.
As part of the system registration process, the INADS Database Administrator enables Alarm
Origination.
Have the serial number of the system and the software version number available at the time of the call.
Return to Task List
740
and press Enter to verify the system can reach the INADS Database
SI Installation and Upgrades
June 2004