Task List: Prepare For Installation And Upgrade - Avaya MCC1 Installation And Upgrades

Task List: Prepare for Installation and Upgrade

Perform these tasks in order:
1
Check your onsite equipment
2
Check your shipment
Check your onsite equipment
Return to Task List
Have the following equipment on site before your shipment arrives:
•
An unoccupied port slot in the Avaya Media Gateway for each TN2302AP IP Media Processor
NOTE:
The TN2302AP consumes 16 W of power per slot compared with an average of 15 W per
slot. Do not fill every available slot in a given carrier with them.
•
An additional unoccupied port slot for the TN799x, if needed. If you have an existing C-LAN
TN799x circuit pack, replace it with the TN799DP or later if it is to be used for IP solutions
registration.
•
A 10 BaseT or 10/100 BaseT Ethernet connection into your local area network (LAN) for the
TN2302AP.
•
A 10 BaseT Ethernet connection into your LAN for the TN799x.
•
Two or more valid, unused IP addresses on your network (one for each TN2302AP or TN802/B
and one for each C-LAN) that can be assigned to the IP Media Processor server. You also need the
subnet mask and default gateway.
NOTE:
The customer provides the IP address, subnet mask, and gateway address.
See Check your shipment
procedure.
Return to Task List
Check your shipment
Return to Task List
When your Avaya Media Gateway IP Solutions order arrives at your site, check the contents (see
Required Hardware
1
Inspect the shipping carton for damage before opening it. If the box is damaged, do not open it.
Inform the shipping company, and ask for instructions on filing a claim.
2
If the box is undamaged, check the contents against the packing slip. Check the condition of each
component, and note any damage or shortages on the packing slip. The carton should contain the
items in
3
Read and follow any directions inserted into the package by the factory.
SI Installation and Upgrades
June 2004
on page 603
on page 603
on page 603 to make sure you have everything you need to start the installation
on page 604).
Required Hardware on page 604 for each TN2302AP IP Media Processor ordered.
Task List: Prepare for Installation and Upgrade
Add IP Solutions
603