Avaya MCC1 Installation And Upgrades page 488

Test the System
LED Indicators
1
If Multi-Carrier Cabinet (MCC1), type
or
If Single-Carrier Cabinet (SCC1), type
2
Verify the screen displays system status screens similar to
Screen for Cabinet 1 (Page 1 of 3),
for Cabinet 2 (Page 2 of 3),
Verify these service states:
Screen
page/section
Page 1, section 1
Page 1, section 2
Page 1, section 3
Page 2, section 1
Page 2, section 2
Page 2, section 3
* The cabinet/carrier/slot numbers for the fiber optic cables are listed.
For example,
for Cabinet 1 (Page 1 of 3),
carrier A, and slot 01.
Figure 181: Sample System Status Screen for Cabinet 1 (Page 1 of 3)
status system all-cabinets
SPE MODE
1A active
1B maint/init
SERVICE
TDM STATE
1A in
1B in
EMERGENCY
TRANSFER
1A
1B
488
on page 488 and to
on page 489.
Field
Tone/Clock
TDM
*
EXP-LINK
Tone/Clock
TDM
EXP-LINK*
01A01
in Figure 181, Sample System Status Screen
on page 488 refers to cabinet stack 01,
SYSTEM STATUS CABINET 1
SELECT SPE ALARMS
SWITCH MAJOR MINOR
auto
auto
CONTROL DEDICATED
CHANNEL TONES
y n
n y
SELECT
SWITCH EXP-LINK
auto-on 01A01-02A01
auto-on 01B01-02B02
status system cabinet number <1-44>
status system all-cabinets
Figure 181, Sample System Status
Figure 182, Sample System Status Screen
Service
State
in
in
in
in (for Cabinet 2)
in (for Cabinet 2)
in (for Cabinet 2)
TONE/ SERVICE SYSTEM
CLOCK STATE
0 0 1A in
0 0 1B in
SERVICE BUS ALARMS
PKT STATE MAJOR MINOR
1 in
SERVICE
STATE MODE
in standby
in active
SI Installation and Upgrades
and press Enter.
and press Enter.
Page 1 of 3 SPE A
SYSTEM
CLOCK TONE
standby standby
active active
BUS OPEN BUS
FAULTS LEADS
CABINET
TYPE
SCC
June 2004