Add Callvisor Asai - Avaya MCC1 Installation And Upgrades

Install Additional Hardware

Add CallVisor ASAI

Move a Single Announcement from one
Announcement Circuit Pack to another
Return to Task List
1
Type change announcements
particular announcement. You may also change the compression rate at this time.
2
Rerecord the announcement, as described in Administrator's Guide for Avaya™ Communication
Manager (555-233-506).
Add Speech Synthesis
Return to Task List
The Speech Synthesizer circuit pack is required when the Voice Message Retrieval, Automatic Wakeup,
or Do Not Disturb features are activated. The circuit pack does not require administration.
1
Determine the port assignment of the Speech Synthesizer circuit pack to be added.
2
Install the Speech Synthesizer circuit pack in the designated carrier slot.
Add Code Calling Access
Return to Task List
The tones for the Code Calling feature are generated by the Tone-Clock circuit packs in the port
networks.
1
Install a TN763B/C/D (or TN417) Auxiliary Trunk circuit pack or a Speech Synthesizer circuit
pack and connect for Loudspeaker Paging. The Code Calling Access feature shares the same ports
as Loudspeaker Paging. An Auxiliary Trunk circuit pack provides 4 ports for Loudspeaker Paging
and Code Calling Access.
2
Administer the form listed under "Code Calling Access" in the Administrator's Guide for
Avaya™ Communication Manager (555-233-506).
Add CallVisor ASAI
Return to Task List
NOTE:
Adding CallVisor ASAI requires a service interruption when you add packet bus support
and you install TN570D circuit packs as part of that support. Give the customer advance
notice of the scheduled addition. See
information.
584
and press Enter to change the circuit pack locations of a
Add Packet Bus Support on page 588 for further
SI Installation and Upgrades
June 2004