Checking Customer Options; Enabling Announcements; Saving Translations - Avaya IG550 Installing And Configuring

Checking Customer Options

If announcements are planned for the TGM550:
1. At the SAT command line, type display system-parameters customer-options,
and press Enter.
The Optional Features screen appears.
2. Press NEXTPAGE to display page 2.
Page 2 of the Optional Features screen appears.
3. Check the Maximum Media Gateway VAL Sources field to verify that VAL sources are
available.

Enabling announcements

1. Only if specifically requested by the customer or your planning documents, at the SAT
prompt, type enable announcement-board <gateway_number> V9
where <gateway_number> is the number of the Juniper Service Router you added.
V9 is the virtual slot (for example, 2V9 means media gateway number 2, slot V9).
Note:
The enable announcement-board command fails if you did not complete the
Note:
V9 field on the Media Gateway screen.
2. Press the Enter key indicated for your terminal type to enable announcements.
The system displays the message:
Command successfully completed

Saving translations

Save translations again after all Communication Manager administration is complete.
1. At the SAT prompt, type save translation.
2. At the SAT prompt, type logoff.
Issue 2 January 2008 153