Check Customer Options; Check Link Status; Power Up Definity Audix System - Avaya CMC1 Installation, Upgrades And Additions

Task Table
16. Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress
messages to indicate the current status.
!
If the preceding steps have been completed successfully, ART displays the
DEFINITY Upgrade Registration Report.
17. Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234,
selecting prompt, 2, prompt 6, then prompt 2) immediately for assistance.
18. Save the DEFINITY Upgrade Registration Report in a file for future
reference or print the report and keep the copy.

Check Customer Options

1. Type display system-parameters customer-options and press
2. Ensure that the G3 version: field is V11.
3. If the customer was using Supplementary Services Protocol b or d on an
ISDN-PRI trunk group before the upgrade, go to screen 7, QSIG Optional
Features, and ensure that the Basic Call Setup field is y.

Check Link Status

1. Type display communication-interface links and press
2. Type status link number and press
3. Check that DS1 trunks and BRI phones are functioning normally.
4. Refer to Maintenance for Avaya MultiVantage DEFINITY Server CSI to test
or restore the out-of-service links.

Power Up DEFINITY AUDIX System

1. To power up the AUDIX assembly, refer to
Procedures'' on page
555-233-118
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or
Home buttons while ART displays these progress messages.
If you have to abort your registration, click on the Abort Session
button that appears with one of the progress messages.
3-27.
Enter
. Repeat this step for each link.
Enter
''DEFINITY AUDIX Power
Issue 5 October 2002
.
Enter
.
3-25