1
Plug the PC into the RS-232 connector on the front of the PRI converter circuit pack.
2
Connect the coaxial Y-cable from the TN464GP to the PRI converter circuit pack.
3
Connect the opposite end of the Y-cable to the 888B coaxial converter.
PRI-to-BRI converter
Figure 321
shows typical connections from the PRI-to-BRI converter to the coaxial facility.
Figure 321: Typical PRI to BRI converter cabling
Figure notes
1
To TN464GP DS1 circuit pack and
PRI-to-BRI converter circuit pack
2
Communication Manager administration PC
3
RS-232 cable to front of converter circuit pack
4
888B coaxial converter
5
Coaxial connection to 2-Mbps facility
NOTE:
The inset shows details of the cable connections between the circuit packs. Connect the
Communication Manager administration PC to the RS-232 connector on the front of the
PRI converter circuit pack.
SI Installation and Upgrades
June 2004
0007_0 RBP 051396
Adjuncts and Peripherals
.Install ISDN converters and adapters
8
7
(2B+D)
(2B+D)
1
(2B+D)
6
Coaxial cable from PRI converter
circuit pack to coaxial converter
7
TN464GP circuit pack
8
PRI-to-BRI converter circuit pack
9
Jumper coaxial cable
10
Inset showing connections on rear
of carrier
829