Resolve Alarms (Ds1 Tie And Ops Trunks); Deliver Or Install License File (Ds1 Tie And Ops Trunks); New Duplicated G3R Installations Only - Avaya MCC1 Installation And Upgrades

1
If the system is high or critical reliability, type
system is in the
2
Type
save translation
information in memory and write it to the translation card or removable media.
3
If the PPN contains a TN750 Announcement circuit pack, type
version
4
If Page 2 of this form shows that recorded announcements were saved, these announcements can
be restored using the restore announcements command. Type
Enter.
Return to Task List

Resolve Alarms (DS1 Tie and OPS Trunks)

Return to Task List
1
See your record of customer busy-outs and recreate the pre-upgrade busy-out states.
2
Type display alarms
3
Examine the alarm log.
4
Resolve any alarms using the Maintenance for Avaya DEFINITY® Server SI (555-233-123) book.
Deliver or Install License file (DS1 Tie and OPS
Trunks)
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.

New Duplicated G3r installations only

1
Retrieve the RFA License File with both serial numbers from the RFA Application.
2
Type
set time
Ensure that the system date and time are set correctly.
3
Use one of these installation methods:
— Direct connection between the switch and RFA
— No connection between the switch and RFA
4
Type save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
5
Type reset system 4
SI Installation and Upgrades
June 2004
mode.
active/standby
and press Enter. This instructs the system to take all translation
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
Install and Administer Trunks
Add DS1 Tie and OPS Trunks
and press Enter to verify that the
status system 1
list configuration software-
restore announcements and press
675