Set The Modem Connected To Data Module; Set The Modem Connected To The Data Terminal Equipment (Dte); Set 7400A And 7400B Options (Modem Pooling) - Avaya MCC1 Installation And Upgrades

Set the Modem Connected to Data Module

Return to Task List
1
Type
add data-module next
2
Type pdm in the Type field.
3
Type x in the Port field.
4
Type
dte
5
Type
add station next
6
Type 2500 in the Type field.
7
Type x in the
8
Type n in the Tests field and press Enter.
9
Type add modem-pool next
10
Type combined in the Group Type field.
11
Type 5 in the Hold Time (min) field.
12
Type two-way in the Direction field.
13
Type 9600 in the Speed field.
14
Type Full in the Duplex field.
15
Type async in the Synchronization field.
16
Type the port pair assignments in the Analog and Digital fields and press Enter.
Return to Task List
Set the Modem Connected to the Data
Terminal Equipment (DTE)
Return to Task List
1
Type
add station next
2
Type 2500 in the Type field.
3
Type the port assignment in the Port field and press Enter.
Set 7400A and 7400B Options (Modem
Pooling)
Return to Task List
Determine if the 7400A or 7400B will be interfacing with D-lead modems or attention control modems.
Use Table 28, Options for D-Lead and Attention Control Modems,
modem. You can set options for the 7400B through a dumb terminal.
SI Installation and Upgrades
June 2004
and press Enter.
in the Connected to field and press Enter.
and press Enter.
field.
Port
and press Enter.
and press Enter.
Install and Connect Modems
Task List: Set up Modem Pooling
on page 714 to interface with either
713