Avaya MCC1 Installation And Upgrades page 395

Install Cabinet Clips (Systems without Earthquake Protection)
Return to Task List
A cabinet clip is required between each pair of stacked cabinets.
At the front of the cabinets, install a cabinet clip between each pair of cabinets by hooking the clip into
the slot of the upper cabinet and snapping the straight leg of the clip into the slot on the lower cabinet. See
Figure 129.
Figure 129: Location of Cabinet Clips
Figure notes
1 Control Cabinet
2 Port Cabinet or Duplicated Control
Cabinet
Return to Task List
SI Installation and Upgrades
June 2004
Install and Connect SCC1 (Single-Carrier Cabinets)
Connect Time Division Multiplexing Bus Cables
3 Port Cabinet
4 Port Cabinet
5 Cabinet Clips
395