Task List: Add Callvisor Asai; New Duplicated G3R Installations Only - Avaya MCC1 Installation And Upgrades

Task List: Add CallVisor ASAI

•
Deliver License File (CallVisor ASAI)
•
Save Translations (CallVisor ASAI)
•
Add Packet Bus Support
•
Add Circuit Packs (CallVisor ASAI)
•
Install Cables (CallVisor ASAI)
•
Enter Added Translations (CallVisor ASAI)
•
Resolve Alarms (CallVisor ASAI)
•
Save Translations (CallVisor ASAI)
Deliver License File (CallVisor ASAI)
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.

New Duplicated G3r installations only

1
Retrieve the RFA License File with both serial numbers from the RFA Application.
2
Type set time
Ensure that the system date and time are set correctly.
3
Use one of these installation methods:
— Direct connection between the switch and RFA
— No connection between the switch and RFA
4
Type
save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
5
Type
reset system 4
Wait until the system has completely reset before continuing.
6
Type
change cabinet 1
In the Carrier Type column change the "B" carrier to processor and submit the form.
7
Type
change system-parameters duplication
Set the Enable Operation of SPE Duplication field to y and submit the form.
8
Type save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
9
Type
reset system 3 preserve-license
License File has been saved in translations) and press Enter.
SI Installation and Upgrades
June 2004
on page 585
on page 587
on page 588 if it is not already installed
on page 587
on page 587
on page 587
on page 588
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
(or
Install Additional Hardware
Task List: Add CallVisor ASAI
on page 587
and press Enter.
reset system 3 no-preserve-license
, since the
585