Avaya MCC1 Installation And Upgrades page 544

Install and Wire Telephones
Task List: Typical Emergency Transfer Panel and Telephone Installation
Install External Ringing
Return to Task List
Connections for external ringing are at an information outlet. The system side of the Main Distribution
Frame (MDF) is connected to a TN2183 (or equivalent) Analog Line circuit pack. The circuitry and
power source for the device are customer-provided.
NOTE:
A maximum of 3 devices can connect to 1 analog line circuit pack port.
1
Wire the ringing device to the information outlet as shown in
Modularity,
2
Administer per the Administrator's Guide for Avaya Communication Manager (555-233-506).
Figure 214: 3-Pair and 4-Pair Modularity
Figure notes
1 Port Circuit Pack
2 System Cabinet Connector Pins
(3-Pair Modularity)
3 Main Distribution Frame (MDF) Pins
(3-Pair Modularity)
544
on page 544 and Figure 215, Example Adjunct Power Connections,
Figure 214, 3-Pair and 4-Pair
4 Input to Information Outlet (4-Pair
Modularity)
5 Adjunct Power
6 Output From Information Outlet (4-
Pair Modularity)
7 Voice or Data Terminal Pins
SI Installation and Upgrades
on page 545.
June 2004