Avaya MCC1 Installation And Upgrades page 467

Administer no-license/emergency numbers
Return to Task List
If the system enters a No-License mode, the switch only processes emergency calls. Use this procedure to
adminster the emergency numbers for No-License mode situations.
1
At the SAT, type
The Feature-Related System Parameters screen displays.
2
In the Emergency Numbers - Internal field (optional) type a valid extension.
NOTE:
This field is intended for campus environments where there is an internal emergency
number that people are directed to use instead of 911. Calls to other extensions will not go
through. This number cannot be a hunt group or ACD number.
3
In the Emergency Number - External field (required) type a 21-digit, dialpad-valid
character string that can include trunk access codes. The default for this field is 911.
4
In the No-License Incoming Call Number field (optional) type a valid extension.
NOTE:
All calls are not rerouted to this number; only calls to this number get through. This
number cannot be a hunt group or ACD number.
5
Press Enter to save the changes.
Return to Task List
Change Site Data (MCC1 only)
Return to Task List
This screen initializes the building, floor, and color data to make them available later in help messages
that refer to site.
1
Type change site-data
2
Type in the optional names for the buildings or offices served by the system.
3
Access the remaining site-data pages and fill them in appropriately.
Change Cabinet 1 (MCC1 only)
Return to Task List
If you are not familiar with the fields on the Cabinet Administration form, refer to
Descriptions on page 468 and
1
Type
change cabinet 1
form, on page 469 appears.
2
Fill in the blanks as required by the location and nature of the cabinet. If the system is critical
reliability, verify the B field is set to the processor option, the D field is set to the dup-sw-node
option, and the E field is set to the switch-node option.
SI Installation and Upgrades
June 2004
change system-parameters features
and press Enter.
Carrier Descriptions on page 468,
and press Enter. A screen similar to
Bring the System Online
Task List: Administer the System
and press Enter.
Cabinet Field
Figure 173, Cabinet Administration
467