Avaya MCC1 Installation And Upgrades page 90

G3iV4 to Avaya Communication Manager
Task List: G3iV4 to Avaya Communication Manager
6
In the Product Type field choose DEFINITY for the following products:
7
Click on the Start Product Registration button.
8
If the data you have entered matches a Maestro database record, the Customer Verification page
appears.
9
Verify the information in the Customer Name and Customer Address fields.
If the information is not what you expected, ensure that you entered the customer's FL/Sold-To
number correctly (Step 4 above). If you entered an incorrect number:
a
Click on the Abort Upgrade Registration Session button at the bottom of the screen.
CAUTION:
DO NOT exit your browser to abort the session. This can result in an incomplete upgrade
registration.
b
Return to the ART User Menu page to begin a new session.
If the FL/Sold-To number matches multiple customers in the database, ART displays the
name and address of each customer with a button to select for this registration session.
10
In the Customer Type field, select
— GOODYEAR, MOTEL 6, STATE FARM
— IN CINCINNATI BELL SERVICE AREA
— OTHER
11
Click on the Continue Upgrade Registration button.
The DEFINITY Product List page appears.
12
Look in the product table (first column heading is "#") to find the row for the product that you
want to register. Click on the number in the far-left column ("#") of the correct row.
NOTE:
It might be helpful to identify the product by looking at the Product Nickname, Product
Alarm ID, INADS Number, Serial Number, or IP Address columns in the table.
If the product is not shown in the table, or if you are not sure whether a listed product is the one
you want to register, contact the DBA group for assistance (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2).
Four new fields appear.
13
In the Data Lock field, choose:
— YES for products with ASG enabled
— NO for all others
14
In the Dialing Type field choose the dialing type that the product will use to report alarms:
— DON'T CHANGE to leave the product's dialing type unchanged
— TONE for DTMF dialing
— PULSE for rotary or pulse dialing
90 SI Installation and Upgrades
June 2004