Avaya MCC1 Installation And Upgrades page 290

System 75 Small-Cabinet to R8si (Blowback)
Task List: System 75 Small Cabinet to R8si
Verify software load [75 small upgrade]
Return to Task List
1
Type list configuration software-versions memory-resident
2
Record the software load.
Return to Task List
Verify system status [75 small upgrade]
Return to Task List
1
Verify that system status is normal.
Execute
2
Verify that the system is alarm-free.
Execute
3
Identify and record customer-placed busy-outs.
Execute
placed by the customer.)
NOTE:
You will restore the customer-placed busy-outs after you have upgraded the system.
4
For a system that has existing BX.25 links that are being retained after the upgrade: identify and
record them.
Execute
5
Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
For upgrades from systems later than G1,
For a system with Expert Agent later than G3V3,
If any command does not complete successfully, escalate the problem immediately.
1
Return to Task List
Save translations [75 small upgrade]
Return to Task List
290
(If status is not normal, take the needed corrective actions.)
status system 1
display alarms (If the system is not alarm-free, take the needed corrective actions.)
display errors (Examine the error log and record the error 18s that identify the busy-outs
display communication-interface links
and press Enter.
list ars analysis
list agent
SI Installation and Upgrades
June 2004