Install Additional Hardware
Task List: Add DCS
Task List: Add DCS
•
Install Cables (Add DCS)
•
Add Circuit Packs (Add DCS)
•
Test the External Connection to the LAN (Add DCS)
•
Deliver License File (Add DCS)
•
Administer DCS (Add DCS)
•
Save Translations (Add DCS)
Return to Task List
Install Cables (Add DCS)
Return to Task List
Install cable from the cabinet to a hub or Internet Protocol (IP) Switch as required. See
Connection for C-LAN,
From the rear of the cabinet:
1
Connect the 259A connector to the backplane connector corresponding to the TN799x slot.
2
Connect one end of the CAT5 cable to the 259A connector. Connect the other end to the
customer's network.
Figure 231: Cable Connection for C-LAN
cydflan2 EWS 101398
Figure notes
1
259A Connector
594
on page 594
on page 595
on page 596
on page 598
on page 598
on page 594. For a pinout of TN799x, see
1
2
2
DW8A Cable
on page 595
TN799x Pinout
3
3
Hub or IP Switch
SI Installation and Upgrades
Figure 231, Cable
on page 595.
June 2004