Powering Ip Phones; Attendant Console Example; Task List: Attendant Console Procedures; Attendant Console Cabling Distances, Local And Phantom Power - Avaya MCC1 Installation And Upgrades

Install and Wire Telephones

Attendant Console Example

Powering IP phones

If customers do not want to use local power for their IP phones, they can use either the
•
P333T-PWR 24-port Cajun switch that provides power over the Ethernet.
•
1152A1 midspan power unit, which supplies power between the Avaya Media Gateway or Server
and IP phones. This power unit also works with the X330 Ethernet expansion module.
Return to Task List
Attendant Console Example
Return to Task List
These links provide specific information:
•

Attendant Console Cabling Distances, Local and Phantom Power

•
Auxiliary Power
•
Hard-Wire Bridging
•
Dual Wiring of Two-Wire and Four-Wire Endpoints

Task List: Attendant Console Procedures

•
Install the Attendant Console
•
Install the 26B1 Selector Console
Attendant Console Cabling Distances, Local
and Phantom Power
The maximum distance from the system for the 302C1 (hardwired) consoles is shown in
Attendant Console Cabling Distances,
NOTE:
IP Softconsole installations are not subject to these distance limitations.
516
on page 517
on page 518
on page 518
on page 519
on page 517.
on page 516
on page 518
SI Installation and Upgrades
Table 23,
June 2004