Get Circuit Pack Information - Avaya MCC1 Installation And Upgrades

Upgrade Firmware on Programmable Circuit Packs
Self and C-LAN-distributed download Procedure
•
Make sure you have the following:
— Superuser or services login and password to the Avaya Communication Manager
— PC or other server with the following:
NOTE:
Some GUI-based FTP applications are incompatible with Avaya Communication
Manager. Command-line FTP applications launched from a DOS prompt or UNIX shell
work best.
If you need to distribute firmware from a source C-LAN to target boards on a DS1-C (DS1 converter
complex) remote port network, then make sure a clear channel exists between the source C-LAN and
those target boards:
1
Type
list fiber-link
2
Find the link between the source C-LAN and the target boards.
3
Type display fiber-link n
Link Administration screen.
4
Go to the page 2 and verify that the Line Coding fields are set to
for E1 facilities.
hdb3
If they are not, then escalate before proceeding with the firmware download.

Get circuit pack information

1
Type list configuration all
718
•
IP connectivity to the source board
•
Web browser (Internet Explorer 5.0 or higher or Netscape 4.x)
•
IP connectivity to the World Wide Web
•
File transfer protocol (FTP) software program
and press Enter.
, where n is the fiber link's number, and press Enter to access the Fiber
and press Enter to access the System Configuration screen.
for T1 facilities and
b8zs
SI Installation and Upgrades
June 2004