Adjuncts and Peripherals
Terminal server installation
Installing and administering the terminal
server
Make sure you have all the equipment on site before the installation. You must have the hardware listed
in
Table
43.
Table 43: Required equipment
Comcode
700015084
NA
NA
NA
405369042
846943306
or 104154414
NA
102631413
NA
NA
NA
You also need a computer (laptop) with the HyperTerminal software program for the initial
administration of the IOLAN+ and to set up the ports.
The general process is to
•
Connect the IOLAN+ to the adjunct and the LAN
•
Administer the ports on the IOLAN+ using a PC or laptop at the local site
•
Test the connectivity back through the switch
Distance limits
The distance limit from the switch to the LAN hub is 328 feet (100 meters). The distance limit from the
LAN hub to the terminal server is 328 feet (100 meters). If installed, the limit from the terminal server to
the adjunct is 50 feet (15 meters).
However, to achieve greater distance limits, the switch's LAN hub/router may be connected to a WAN
and the hub/router for the terminal server also connected to the same WAN.
794
Description
IOLAN+ 104 communications server
RJ45-to-DB25 connector for IOLAN+
(supplied with 700015084)
DB25-to-DB9 connector for PC COM port
RS232 Null modem (if needed for PC or
printer connectivity)
Male/female adapter (if necessary)
6-inch RJ45 crossover cord, or
10/100Base-T auto-sensing LAN hub or router
259A adapter, or
CAT5 cross connect hardware and connecting
blocks
RJ45 UTP Category 5 modular cords
451A in-line RJ45 adapters, as needed to
connect modular cords together
Qty
Supplier
1
Avaya
4
Avaya
1
Avaya
1 or more
Avaya
1 or more
Avaya
1
Avaya
1
Customer
1
Avaya
Customer
1–2
Customer
SI Installation and Upgrades
June 2004