Avaya MCC1 Installation And Upgrades page 645

Figure 256: TN802B IP Interface faceplate
Figure notes
1 LCD display
2 Reset button (recessed)
3 Red board status LED
Return to Task List
Upgrade IP trunks (R7) to H.323 trunks
Return to Task List
If there are existing IP trunk connections that you want to upgrade to H.323 trunk connections, do the
following steps. Otherwise, go to
To upgrade an existing IP trunk (R7) to an H.323 trunk (R10) requires first getting IP information from
the existing TN802 before upgrading the TN802 to TN802B.
1
Click on My Computer > Control Panel > Network.
2
Click the Protocols tab.
3
Select
TCP/IP Protocol
SI Installation and Upgrades
June 2004
1
2
4
5
fpdfmapd KLC 030899
4 PCMCIA card slot
5 Yellow PCMCIA disk-in-use LED
Upgrade to TN802B (R10)
from the list.
Add IP Solutions
Task list: Upgrade a TN802 to a TN802B
3
on page 647
645