Avaya MCC1 Installation And Upgrades page 595

TN799x Pinout
Backplane Pin
103
003
104
004
Return to Task List
Add Circuit Packs (Add DCS)
Return to Task List
Determine the port assignments of the circuit packs to be added. If there are no available port slots in the
processor cabinet for the C-LAN circuit pack, place it in an EPN cabinet port slot.
CAUTION:
When adding or replacing any hardware, be sure to ground yourself against electrostatic
discharge (ESD) by wearing a grounded wrist strap.
NOTE:
The TN799x circuit pack is hot-swappable, so you do not need to power down the carrier
to install it.
Insert the TN799x circuit pack into the port slot identified earlier.
Return to Task List
Test the External Connection to the LAN (Add DCS)
Return to Task List
To test the external IP connections, ping the C-LAN server and ping a known computer connected to your
network. If everything is configured correctly, the Result column on the Ping Results screen reads
. If it reads
pass
cabling.
3
Type ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
carrier, and slot of the TN799x C-LAN circuit pack.
4
Type
ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
and slot of the TN799x C-LAN circuit pack.
5
Type ping ip-address nnn.nnn.nnn.nnn board UUCSS
nnn.nnn.nnn.nnn
cabinet, carrier, and slot of the TN799x C-LAN circuit pack.
SI Installation and Upgrades
June 2004
25-Pair Wire Color
White/Orange
Orange/White
White/Green
Green/White
, verify the IP-address information and check the connectivity, including the
abort
is the IP address of the TN799x C-LAN circuit pack and
is the IP address of the customer's gateway and
is the IP address of another computer beyond the gateway and
Peripheral
Lead Name Connector Pin
TD+ 27
TD- 2
RD+ 28
RD- 3
and press Enter. The variable
and press Enter. The variable
and press Enter. The variable
Install Additional Hardware
Task List: Add DCS
is the cabinet,
UUCSS
is the cabinet, carrier,
UUCSS
UUCSS is the
595