Job Aid
Cabling Guide—MCC1 and SCC1 Media
Gateway
This cabling guide provides graphical representations on various cable connections for the Avaya MCC1
and SCC1 Media Gateways used in an S8700 Multi-Connect configuration. Different ribbon cables are
used and CAT5 Ethernet cables connect differently, depending on whether the carrier is a newer or older
version.
For newer carriers, A carrier position can be identified as J58890AF-2, L13 or higher list number and the
B carrier can be identified as J58890BB-4, L14 or higher (see page 2).
For older carriers, A carrier position can be identified as J58890AF-2, with a list number lower than L13
and the B carrier can be identified as J58890BB-4, with a list number lower than L14 (see page 3). For
some connectivity information, see page 4.
Although the graphic shows an IPSI in a second port network in a MCC1 Media Gateway with multiple
port networks, each port network does not require an IPSI circuit pack. One IPSI can control the whole
media gateway. However, when there are remote port networks, you may need to put IPSIs in more than
one port network in a media gateway to reach the minimum number of IPSIs required in an S8700 Multi-
Connect configuration.
Table 1, Cables used with the G650, MCC1, and SCC1 Media Gateways,
identification.
Table 1: Cables used with the G650, MCC1, and SCC1 Media Gateways
Comcode
601795495
601930639
700168727
700168735
700168834
Cabling Guide — MCC1 and SCC1 Media Gateway
555-245-771, Issue 2, June 2004
Job Aid Cabling Guide—MCC1 and SCC1 Media Gateway
Description
H600-204,G1—ICCA,B,C,D duplication ribbon cables (MCC1).Connectors
available only on a J58890AF-2, L13 expansion control carrier with AC1 L5
backplane (vertical Amphenol connectors).
H600-248, G1—ICCA,B duplication ribbon cables (SCC1).
Ribbon cable—from maintenance board to IPSI in MCC1 A carrier (migration only)
or SCC1 A media gateway
Ribbon cable—from maintenance board to IPSI in MCC1 B carrier (migration only)
Ribbon cable—from maintenance board to IPSI in SCC1 B media gateway
on page 1 shows the cable
1 of 2
1