Avaya MCC1 Installation And Upgrades page 620

Add IP Solutions
Task list: Install the TN802B in Media Processor mode
U.S. Robotics Modem Dip Switch Settings
Dip
Switch
1
2
3
4
5
6
7
8
Return to Task List
Connect the Ethernet
Return to Task List
Connect the network cable to the ETHERNET connector on the TN802B external cable assembly.
You need a CAT5 or better cable for 100-Mbyte operation.
620
Setting Description
UP Data Terminal Ready normal
DOWN Data Terminal Ready override
UP Verbal result codes
DOWN Numeric result codes
UP Suppress result codes
DOWN Display result codes
UP Echo offline commands
DOWN No echo, offline commands
UP Auto answer on first ring or higher if specified in NVRAM
DOWN
Auto answer off
UP Carrier detect normal
DOWN Carrier detect override
UP Load NVRAM defaults
DOWN Load factory defaults
UP Dumb mode
DOWN Smart mode
SI Installation and Upgrades
June 2004