Avaya MCC1 Installation And Upgrades page 589

Disable Alarm Origination (Packet Bus Support)
Return to Task List
1
Type change system-parameters maintenance
2
Set the
Alarm Origination Activated
CAUTION:
If you do not disable Alarm Origination, the system may generate alarms, resulting in
unnecessary trouble tickets.
3
For some releases of software, disable Cleared Alarm Notification and Restart
Notification before submitting the form.
Return to Task List
Save Translations (Packet Bus Support)
Return to Task List
If standard reliability:
1
Type
status system 1
mode.
If high or critical reliability:
1
Type
status system 1
mode.
2
Type
save translation
information in memory and write it to the translation card.
3
If the system contains a TN750/B Announcement circuit pack, type
press Enter. If administered recorded announcements are listed, type
software-version long
and press Enter.
Return to Task List
Power Down Cabinet (Packet Bus Support)
Return to Task List
1
At the PPN, set the main circuit breaker to OFF.
2
At an EPN, set the main circuit breaker to OFF.
Install Circuit Packs (Packet Bus Support)
Return to Task List
Install the appropriate circuit packs. See
SI Installation and Upgrades
June 2004
and press Enter.
field to n.
and press Enter to verify that the system is in the
and press Enter to verify that the system is in the
and press Enter. This instructs the system to take all translation
and press Enter. To save the announcements, type
Circuit Pack Locations for Packet Bus in
Install Additional Hardware
Task List: Add Packet Bus Support
active/standby
active/standby
display announcements
list configuration
save announcements
PPN.
and
589