Avaya MCC1 Installation And Upgrades page 855

How do I connect the fiber cable for a duplicated single carrier installation or upgrade?
1
Remove both back panels from the A and B cabinets. See
2
Insert the pass-through tool from the front to the back of either the A cabinet or the B cabinet. See
Figure 341, Illustration 2,
3
Pull the cable through from the back to the front of the cabinet. See
page 856.
4
It is critical to pass the fiber-optic cable through the opening in the A cabinet. See
Illustration 4,
Repeat steps 2 and 3 for the other cabinet.
5
Dress the fiber-optic cable through the openings at the right side of the back panels, to the right of
the duplication interface ribbon cables. See
Dress the TDM-LAN cable (not illustrated) through the opening at the left side of the back panels.
6
Connect the fiber-optic cable to the duplication interface circuit pack in each cabinet. Verify that
the circuit pack is the first (left-most) circuit pack in each cabinet. See
on page 859.
Figure 340: Illustration 1
SI Installation and Upgrades
June 2004
on page 856.
on page 857.
1 6
8
7
Frequently Asked Questions
Figure 340, Illustration 1,
Figure 342, Illustration 3,
Figure 344, Illustration 5, on page 858.
R R R R
1
A U
X
P I
D C
E
T E
R M
D O
T
prdascc1 KLC 082500
Links and FAQs
on page 855.
on
Figure 343,
Figure 345, Illustration 6,
1
S S S S
R R R M M R M M
A A A A L L L L
A A A A
T T T T R R R R
E E E E M M M M
E E E E
855