Task List: Installing Isdn-Pri Trunks; Installing Isdn - Pri In North American; Installing Isdn - Pri Internationally - Avaya MCC1 Installation And Upgrades

Task List: Installing ISDN—PRI Trunks
1

Installing ISDN - PRI in North American

2

Installing ISDN - PRI Internationally

3
Add Packet Bus Support (ISDN PRI)
4
Add Circuit Packs (ISDN PRI)
5
Install Cables (ISDN PRI)
6
Enter Added Translations (ISDN PRI)
7
Resolve Alarms (ISDN PRI)
8
Save Translations (ISDN PRI)
Return to Task List
Installing ISDN - PRI in North American
Return to Task List
1
Use a TN767E (or later) DS1 or a TN464GP DS1/E1 circuit pack for a signaling link and up to 23
ISDN — PRI Trunk Group members.
2
Install a Tone-Clock circuit pack to provide synchronization for the DS1 circuit pack.
3
If using a TN464GP, then packet bus support has not been added, requiring greater than 4 PRI
signaling groups, see
packs for packet bus support.
As an option to the TN768 or TN2182B Tone-Clock, a TN780 Tone-Clock (installed in the PPN) can
interface external Stratum 3 synchronization for DS1.
Return to Task List
Installing ISDN - PRI Internationally
Return to Task List
1
Install a TN464GP (or later) DS1/E1 circuit pack for the assignment of the 2 signaling channels
and up to 30 ISDN — PRI Trunk Group members. Each E1 span provides 32 ports.
2
Install a Tone-Clock circuit pack to provide synchronization for the DS1/E1 circuit pack.
3
If packet bus support has not been added and greater than 8 PRI signaling groups are required, see
Add Packet Bus Support
support.
As an option to the TN2182B Tone-Clock, a TN780 Tone-Clock (installed in the PPN) can interface
external Stratum 3 synchronization for DS1.
Return to Task List
SI Installation and Upgrades
June 2004
on page 667
on page 667
on page 668
on page 668
on page 668
on page 668
on page 668
on page 668
Add Packet Bus Support on page 588 for installation of additional circuit
on page 588 for installation of additional circuit packs for packet bus
Install and Administer Trunks
Install ISDN—PRI Trunks
667