Avaya MCC1 Installation And Upgrades page 280

System 75 XE to R8si (Blowback)
Task List: System 75 XE to R8si
Return equipment to MSL [75 XE upgrade]
Return to Task List
•
Return the system equipment replaced during the upgrade to Avaya according to:
•
In general, return old equipment and crash kits to the MSL, and return ordered but unused
equipment to the Denver factory.
•
If you are returning heavy equipment such as a cabinet, the project manager should arrange for
Avaya personnel to pick up the equipment.
•
Tag the returned equipment appropriately.
The replaced System 75 equipment includes:
•
System 75 control cabinet, control circuit packs, and RMSS tape drive
•
System 75 TN741 (or international TN419A) tone-clock circuit pack if replaced
•
R1V3 tape cartridges
•
TDM cables and AHF103 cable adapters
•
TDM cables and AHF103 cable adapters
•
AHF1 TDM bus terminators
•
Lower rear cover for expansion control cabinet
Return to Task List
280
Methods and Procedures for Basic Material Returns
SI Installation and Upgrades
June 2004