Avaya MCC1 Installation And Upgrades page 707

11
Slide the tool to the front of the cabinet. See
12
Pull the tool (with adapter and cable attached) out through the front of the cabinet.
13
Close the rear door.
14
Replace the fan cover. See
15
Connect the cable to the front of the TN1648B circuit pack. See
the TN1648B Circuit Pack,
16
Dress the cable straight down the front of the circuit pack. Do not allow the cable to cross in front
of another circuit pack.
17
Attach the cable mount to the cabinet and secure the cable. See
the TN1648B Circuit Pack,
18
Close the front door.
19
Discard the pass-thru tool.
20
Log in as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password.
21
Administer the system by referring to the
22
Type
list configuration all
correct slot and that there are no circuit pack conflicts.
Figure 287: External Modem Pass-Thru Kit Equipment
4
SI Installation and Upgrades
June 2004
Figure 292, Insert the Pass-thru Tool,
Figure 293, Replace the Fan Cover,
on page 711.
on page 711.
Chapter , "Adjuncts and
and press Enter to determine if the new circuit pack appears in the
1
2
5
Install and Connect Modems
Task List: Install and Connect Modems
on page 710.
on page 711.
Figure 294, Connect the Cable to
Figure 294, Connect the Cable to
Peripherals".
3
6
indakit2 EWS 091498
707