Save Announcements (Tn750 Or Tn750B Only) [From R5/R6/R7/R8Si]; Shut Down Definity Lan Gateway [From R5/R6/R7/R8Si] - Avaya MCC1 Installation And Upgrades

R5/R6/R7/R8si to Avaya Communication Manager
Task List: R5/R6/R7/R8si to Avaya Communication Manager
2
If the
save translation
screen and escalate the problem immediately.
Keep the translation media in a safe and secure place. In case of failure, you use this translation to
restore the system.
Return to Task List
Save announcements (TN750 or TN750B only)
[from R5/R6/R7/R8si]
Return to Task List
NOTE:
You do not need to save announcements for configurations containing the TN750C or
TN2501AP integrated announcement circuit packs, which contain on-board, nonvolatile
memory.
Use this procedure for configurations containing the TN750 or TN750B announcement circuit pack.
Saving announcements takes about 40 minutes.
1
To determine whether the sytem has recorded announcements, type
press Enter.
If no recorded announcements are listed, you do not have to save announcements.
NOTE:
If the customer can verify that no announcements have been changed since the
announcements were last saved, you do not have to save announcements. (But if there is
any doubt, save announcements!)
2
Type
save announcements
Return to Task List
Shut down DEFINITY LAN Gateway [from
R5/R6/R7/R8si]
Return to Task List
!
Neglecting to shut down the LAN Gateway assembly before powering down the system
cabinet can damage the LAN Gateway disk.
1
Log onto the DEFINITY LAN Gateway.
2
From the main menu, click Maintenance > Reset System > Shutdown.
116
command fails, do not continue. Record the error code that appears on the
<
port network
WARNING:
display announcements
> < > < > and press Enter.
carrier slot
SI Installation and Upgrades
and
June 2004