Avaya MCC1 Installation And Upgrades page 470

Bring the System Online
Task List: Administer the System
Figure 174: Typical Add Cabinet Form
CABINET DESCRIPTION
Number of Portnetworks: 1
Survivable Remote EPN: _
CARRIER DESCRIPTION
Carrier
Return to Task List
Set Country Options
Return to Task List
Certain country options need to be set to turn red failure indication LEDs off. Refer to
Codes, on page 471 for a list of country codes.
1
Type change system-parameters country options
A screen similar to
is displayed. The cursor is set on the Companding Mode line.
2
If the country uses A-Law companding, type A-Law and press Enter.
The default companding mode is mu-Law.
Other items eventually need to be entered on this screen, but this is all that must be done to turn
the red alarm LEDs off.
3
If all red LEDs do not go off, reseat (unplug and reinsert) any port circuit packs displaying red
LEDs.
CAUTION:
To avoid a disk crash, never reseat the DEFINITY AUDIX System without first shutting it
down. Shut down the DEFINITY AUDIX System (and allow the disk to completely spin
down) before unplugging the assembly. See
Procedures
470
Cabinet: 5
Cabinet Layout: _____________________
Cabinet Type: expansion-port network
Room: __________
Floor: __________
Building: __________
Carrier Type
Figure 175, Typical System Parameters Country-Options Screen,
on page 451 for the proper procedures.
CABINET
Survivable Remote Processor ID: _____
Number Duplicate
and press Enter.
DEFINITY AUDIX System Power
SI Installation and Upgrades
Page 1 of 1
Table 16, Country
on page 472
June 2004