Avaya MCC1 Installation And Upgrades page 496

Test the System
LED Indicators
4
If Multi-Carrier Cabinet (MCC1), type
or
If Single-Carrier Cabinet (SCC1), type
A screen similar to
is displayed.
5
Verify the MODE of the expansion links have changed.
6
If any problems are indicated, check the TDM cables and the inter-cabinet cables (ICC) in the
associated Expansion Port Network (EPN).
Figure 190: Sample of System Status before Expansion Link is Set
status system all-cabinets
EMERGENCY
TRANSFER
1A
1B
Command successfully completed
Command:
Figure 191: Sample of System Status after Expansion Link is Set
status system all-cabinets
EMERGENCY
TRANSFER
1A
1B
Command successfully completed
Command:
Return to Task List
496
status system cabinet number <1-44>
status system all-cabinets
Figure 191, Sample of System Status after Expansion Link is Set,
SYSTEM STATUS CABINET 1
SELECT
SWITCH EXP-LINK
unavail 01A01-02A01
auto-on 01B01-02B02
-
-
SYSTEM STATUS CABINET 1
SELECT
SWITCH EXP-LINK
auto-on 01A01-02A01
auto-on 01B01-02B02
and press Enter.
SERVICE CABINET
STATE MODE TYPE
in standby ESCC
in active
SERVICE CABINET
STATE MODE TYPE
in active ESCC
in standby
SI Installation and Upgrades
and press Enter.
on page 496
June 2004