Avaya MCC1 Installation And Upgrades page 319

13
Test Stratum 3 Clock
14
Perform Complete System Test
15
Activate and Test Alarm Origination Feature
Return to Task List
Readminister translation [75 small upgrade]
Return to Task List
If the customer has added one or more components (for example, a call pickup group) to the system since
translation was done, the customer is responsible for readministering the translation.
Return to Task List
Rerecord announcements [75 small upgrade]
Return to Task List
If you have not saved and restored announcements during the upgrade, the customer must re-record all
announcements now.
If the customer changed any announcements after the they provided the source tape for the blowback
flash card, the customer must re-record the new announcements.
Return to Task List
Save announcements and translation [75 small upgrade]
Return to Task List
If you have restored announcements using the white translation card from an earlier release, insert the R8
white translation card now.
NOTE:
If the customer does not have a backup white translation card, it is very important to make
sure that the new software is running normally before you save the translation. After you
save translation to the translation card, the card cannot be used to bring up translation if
you restore the old system.
1
Type save translation
This takes about 10 minutes.
NOTE:
Do not press any keyboard key until after the terminal displays the success message. For
example, if you press Enter more than once after typing the command, the second Enter
erases the screen and you never see the success message.
SI Installation and Upgrades
June 2004
System 75 Small-Cabinet to R8si (Blowback)
and press Enter.
Task List: System 75 Small Cabinet to R8si
319