Avaya MCC1 Installation And Upgrades page 628

Add IP Solutions
Task list: Install the TN802B in IP Trunk mode
Required Hardware
Description
TN799x C-LAN circuit pack.
TN802B IP Interface Assembly
H600-512.G1 external cable assembly
259A connector
CAT5 or better cable
U.S. Robotics Sportster external modem, Model USR
33.6 EXT (U.S. customers only). Non-U.S. customers
must provide a modem comparable to this model
20-ft DB-25 serial cable from modem to TN802B
external cable assembly (U.S. customers only). Non-U.S.
customers must provide a serial cable.
1 One TN799x supports more than one TN802B.
Figure 247: TN802B IP Interface External Cable Assembly
8
Figure notes
1 Amphenol connector to connector
corresponding to TN802B slot
2 To VGA monitor
3 To USB (not used)
4 To keyboard
Return to Task List
628
6
7
Quantity
1
1
1 or more
1 or more
1
1
1
.
1
5 4
5 To mouse
6 To ethernet
7 25-pin male connector to modem
8 25-pin male connector to COM2 (not
used)
SI Installation and Upgrades
1
3 2
cbdfocto AWF 122398
June 2004