Adding Co, Fx, Wats, And Pcol Trunks; Adding Did Trunks; Adding Tie Trunks; Si Installation And Upgrades June - Avaya MCC1 Installation And Upgrades

Adding CO, FX, WATS, and PCOL Trunks

Return to Task List
Each Central Office (CO), Foreign Exchange (FX), Wide Area Telecommunications Service (WATS), or
Personal Central Office Line (PCOL) trunk is connected to 1 port of either an 8-port TN747B or to 1 of
an assortment of non-U.S. CO Trunk circuit packs.
1
See Wiring Off-Premises Stations (TN1654 DS1 Converter)
circuit pack in the assigned carrier slot (if an additional circuit pack is required).
2
Administer the Trunk Group screens listed under CO, FX, WATS, or PCOL Trunk Group in
Administrator's Guide for Avaya Communication Manager (555-233-506).
3
Determine the port assignment of the trunk from the Trunk Group screen.
Return to Task List

Adding DID Trunks

Return to Task List
Each Direct Inward Dial (DID) trunk connects to 1 port of an 8-port TN753B or to 1 of an assortment of
non-US DID trunk circuit packs.
4
Determine the port assignment of the trunk from Trunk Group form.
5
See Wiring Off-Premises Stations (TN1654 DS1 Converter)
circuit pack in assigned carrier slot (if an additional circuit pack is required).
6
Administer DID Trunk Group screens in Administrator's Guide for Avaya Communication
Manager (555-233-506).
Return to Task List

Adding Tie Trunks

Return to Task List
Each tie trunk connects to 1 port of a 4-port TN760E or to an assortment of non-US tie trunk circuit
packs.
1
Determine the port assignment of the trunk from Trunk Group form.
2
Install a TN760E or a non-United States tie trunk circuit pack in the assigned carrier slot (if an
additional circuit pack is required).
3
For customer-owned (not leased) tie-trunk facilities (such as campus environments), TN760E
circuit packs provide signaling capabilities beyond those specified by the industry-wide E & M
standard. Use
Option Switch Settings and Administration
set switches on the TN760E circuit pack, and administer the port.
SI Installation and Upgrades
June 2004
Figure 272, Tie Trunk Circuit Packs (Component Side),
Install and Administer Trunks
Adding CO, FX, WATS, and PCOL Trunks
on page 690 and install a CO trunk
on page 690 and install a DID trunk
on page 670 and
on page 670 to choose the preferred signaling format,
Tie Trunk
669