Changing The Route Patterns - Avaya MCC1 Installation And Upgrades

10
In the Rte Pat field, type the desired Route Pattern (in the example, the route pattern is
NOTE:
For the following step, if you are using the Attendant Crisis Alerting feature, type alrt
instead of emer
11
In the Call Type field, enter
Figure 267: ARS Digit Analysis Table
Dialed
String
9________________ 7_ 7_
976______________ 7_ 7_
11_______________ 2_ 2_
911______________ 3_ 3_
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
_________________ __ __
Return to Task List

Changing the Route Patterns

Return to Task List
1
At the prompt, type
example in
pattern is
2
On the Route Pattern screen, in Grp. No. field, enter the CAMA trunk group number.
3
In the FRL field, enter 0.
NOTE:
For the following step, if the Central Office (CO) wants KP11ST as the dialed digit string,
then leave blank. If the CO wants KP911ST, then insert a 9 in the Inserted Digits
field.
4
Administer the Inserted Digits field if needed and press Enter.
5
At the prompt, type
269, Route Pattern form (Page 1, Pattern Number 12),
press Enter.
SI Installation and Upgrades
June 2004
emer
ARS DIGIT ANALYSIS TABLE
Partitioned Group Number:
Total Rte Call Nd ANI
Mn Mx Pat Type Num Rq
2__ hnpa ___ n __________________ __ __ ___ ____ ___ _
den hnpa ___ n __________________ __ __ ___ ____ ___ _
11_ emer ___ n __________________ __ __ ___ ____ ___ _
12_ emer ___ n __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
___ ____ ___ _ __________________ __ __ ___ ____ ___ _
change route-pattern <number>
Figure 268, Route Pattern form (Page 1, Pattern Number 11),
) and press Enter.
11
change route-pattern <number>
and press Enter.
_ Percent Full:
Dialed Total
String Mn Mx
(the route pattern to be changed; in the
(the route pattern to be changed; in
on page 665, the route pattern is
Install and Administer Trunks
Install CAMA/E911 Trunk
).
12
___
Rte Call Nd ANI
Pat Type Num Rq
on page 664, the route
Figure
) and
12
663