Avaya MCC1 Installation And Upgrades page 269

4
Ensure that the exposed portion of the TDM/LAN cable that is between the cabinets does not get
pinched.
5
Tighten all screws.
Figure 66: Locations of ground plate cabinet clip and battery
CABINET
CLIP
BATTERY
Return to Task List
Install cabinet clip(s) [75 XE upgrade]
Return to Task List
A cabinet clip, used to ground and stabilize the cabinets, is required between each cabinet. Use this
procedure to install the cabinet clips in systems without earthquake protection.
At the front of the cabinets, install the cabinet clip between the cabinets by hooking the clip into the slot
of the upper cabinet and snapping the straight leg of the clip into the slot on the lower cabinet (see
67).
SI Installation and Upgrades
June 2004
SIDE VIEW
2-CABINET PORT NETWORK
System 75 XE to R8si (Blowback)
Task List: System 75 XE to R8si
GROUND
PLATE
Figure
269