Install and Administer Trunks
Add DS1 Tie and OPS Trunks
Disable Scheduled Maintenance and Alarm
Origination
to INADS (DS1 Tie and OPS Trunks)
Return to Task List
1
To prevent scheduled daily maintenance from interfering with the update or upgrade, type
change system-parameters maintenance
2
If scheduled maintenance:
— has begun: set the Stop Time field to 1 minute after the current time.
— has not begun: set the Start Time field to at least 8 hours after the upgrade starts.
CAUTION:
If you do not disable Alarm Origination, the system may generate alarms, resulting in
unnecessary trouble tickets.
3
Type neither in the Alarm Origination to OSS Numbers field and press Enter.
Return to Task List
Save Translations (DS1 Tie and OPS Trunks)
Return to Task List
1
If the system is high or critical reliability, type
system is in the
2
Type
save translation
information in memory and write it to the translation card or removable media.
3
If the system contains a TN750/B Announcement circuit pack, type
press Enter. If administered recorded announcements are listed, type
software-version
last saved. To save the current announcements, type
Shut Down DEFINITY LAN Gateway System
(DS1 Tie and OPS Trunks)
Return to Task List
!
Neglecting to shut down the LAN Gateway assembly before powering down the system
cabinet can damage the LAN Gateway disk.
1
Log onto the DEFINITY LAN Gateway.
2
From the main menu, click Maintenance > Reset System > Shutdown.
672
active/standby
and press Enter. This instructs the system to take all translation
press Enter. Check Page 2 of this form to see when the announcements were
WARNING:
and press Enter.
status system 1
mode.
save announcements
and press Enter to verify that the
display announcements
list configuration
and press Enter.
SI Installation and Upgrades
June 2004
and