Avaya MCC1 Installation And Upgrades page 469

Carrier Descriptions
Number
Duplicate
Figure 173: Cabinet Administration form
CABINET DESCRIPTION
Number of Portnetworks: 1
Survivable Remote EPN: _
CARRIER DESCRIPTION
Carrier
C
B
A
X
D
E
Return to Task List
Add Cabinet 2 through N (AvayaDEFINITY Server r)
Return to Task List
1
Type add cabinet <2-44>
470.
2
Fill in the blanks as required by the location and nature of the cabinet.
SI Installation and Upgrades
June 2004
Display-only field. Consists of two fields: the Designator and
fields. The Designator field contains one of the
Number
following entries:
PN — If the carrier is a port carrier, processor carrier, or unused
carrier.
SN — If the carrier is a switch node carrier, or duplicate switch
node carrier.
The Number field contains either the switch node number or port
network number.
The location for the duplicate of a switch node. Only displays
when administration of PNC Duplication is enabled. If the
Carrier Type is dup-switch-node, the field displays the
three-character carrier address of the duplicate. The first two
characters represent the cabinet number; the third character
represents the carrier (A through E).
This is a display-only field if the Carrier Type field is
switch-node.
Cabinet: 1
Cabinet Layout: five-carrier_________
Cabinet Type: processor_____________
Room: __________
Floor: __________
Building: __________
Carrier Type
port_____________
processor________
processor
Fan
dup-sw-node______
switch-node______
and press Enter. See
Task List: Administer the System
CABINET
Survivable Remote Processor ID: _____
Number Duplicate
PN 01 ___
PN 01 ___
PN 01 ___
SN 01 01E
SN 01 01D
Figure 174, Typical Add Cabinet Form,
Bring the System Online
Page 1 of 1
on page
469