Avaya MCC1 Installation And Upgrades page 468

Bring the System Online
Task List: Administer the System
Cabinet Field Descriptions
Field Name
Cabinet
Cabinet Layout
Cabinet Type
Number of Port
Networks
Survivable
Remote EPN
Survivable
Remote
Processor ID
Room
Floor
Building
Carrier Descriptions
Carrier Type
468
Field Description
Display-only field. This field shows the cabinet number as
entered in the command line.
Enter the type of physical carrier layout. Valid entries are
five-carrier and single-carrier-stack. Default is blank.
Display-only field. This field shows the type of cabinet being
administered. If cabinet 01 is being administered, this field is
processor. If cabinets 02 through 44 are being administered,
this field is expansion-portnetwork.
Enter the number of PNs in the cabinet. Valid entries are 1
(default), and 2.
Displays only if the Cabinet Type field is expansion-
portnetwork. If set to y, the cabinet has a remote si processor
that provides a backup if the links to this cabinet are
inoperative.
Displays only if the Survivable Remote EPN field is y.
Enter the product ID assigned to the remote si. This allows
DEFINITY Fault Management to know which machine is the
backup for this cabinet. The entry in this field cannot be the
same as the entry in the Production Identification
field in the Maintenance-Related System Parameters form.
Enter up to ten characters identifying the room where the
cabinet is located. Default is blank.
Enter up to ten characters identifying the floor in the building
where the cabinet is located. Default is blank.
Enter up to ten characters identifying the building where the
cabinet is located. Default is blank.
Enter the type of carrier in the cabinet being administered. Valid
entries are dup-switch-node, expansion-control, not-used, port,
processor, and switch-node.
SI Installation and Upgrades
June 2004