Avaya MCC1 Installation And Upgrades page 388

Install and Connect SCC1 (Single-Carrier Cabinets)
Connect Time Division Multiplexing Bus Cables
High or Critical Reliability PPN - Three Cabinet Stack
Return to Task List
1
Remove the Time Division Multiplexing (TDM) Bus Terminator from Slot 18 of Control Cabinet
A (Processor Port Network (PPN)) and move it to Slot 17 on the top port cabinet. See
Connections for High or Critical Reliability Systems,
2
Connect the supplied TDM Bus Cables (WP-91716 L3) as shown.
Figure 122: Connections for High or Critical Reliability Systems
Figure notes
1 AHF110 TDM Bus Terminator (Slot 17)
2 TDM/Local Area Network (TDM/LAN)
Pinfield (Slot 00)
3 TDM bus Cable (WP-91716 L3)
4 Port Cabinet
5 Control Cabinet A Position
Return to Task List
388
1
3
3
3
7
6
7
8
9
on page 388.
2
4
2
4
8
2
9
5
8
6
tdm_cab4 CJL 053096
AHF110 TDM Bus Terminator (Slot 03)
Slot 18
Inter-Cabinet Cables (ICC) B and C
(H600-259-G1)
Duplicated Control Cabinet B Position
SI Installation and Upgrades
Figure 122,
June 2004