Install And Administer Trunks; Task List: Add Trunks; Install Cama/E911 Trunk; Task List: Installing Cama/E911 Trunks - Avaya MCC1 Installation And Upgrades

Install and Administer Trunks

These links provide installation and wiring examples for analog and digital trunks. These are examples
only and actual wiring procedures may vary at each site. For IP trunks, see

Task List: Add Trunks

•

Install CAMA/E911 Trunk

•
Install ISDN—PRI Trunks
•
Adding CO, FX, WATS, and PCOL Trunks
•
Adding DID Trunks
•
Adding Tie Trunks
•
Add DS1 Tie and OPS Trunks
•
Adding TTC Japanese 2-Mbit Trunks
•
Add TN1654 DS1 Converter (r only)
Install CAMA/E911 Trunk
Return to Task List
The CAMA/E911 feature requires the TN429C/D CO trunk circuit packs (or later suffix).
Port Networks (PNs) that include TN429C circuit packs used to interface to CAMA trunks require some
CPTR resources to be either TN744E V2 or TN2182B circuit packs, since TTR/CPTR or General
Purpose Tone Receiver (GPTR) resources are selected from the pool available in the PN when needed.
Compatibility Tone Clock, TTR/CPTR, and GPTR Circuit Packs
circuit packs are compatible and which are not affected.

Task List: Installing CAMA/E911 Trunks

1
Installing the Circuit Pack
2
Adding the Trunks
3
Changing the Feature Access Code
4
Changing the ARS Digit Analysis
5
Changing the Route Patterns
6
Changing the CAMA Numbering and Class of Restriction
Return to Task List
SI Installation and Upgrades
June 2004
on page 657, with a separate task list
on page 666, with a separate task list
on page 669
on page 669
on page 669
on page 670, with a separate task list
on page 677
on page 677, with a separate task list
on page 659
on page 660
on page 661
on page 662
on page 663
Install and Administer Trunks
Task List: Add Trunks
Add IP Solutions on page 601.
on page 658 denotes which of these
on page 665
657