Auxiliary Connector Outputs - Avaya MCC1 Installation And Upgrades

Install and Wire Telephones

Auxiliary Connector Outputs

Pinout of C6F Cable
Wire Color
White/Green
Green
White/Brown
Brown
White/Slate
Slate
Return to Task List
Auxiliary Connector Outputs
Return to Task List
Connect a 25-pair cable from the AUX connector on the back of the control carrier to a connecting block
on the trunk/auxiliary field.
Table 21, Auxiliary Lead Appearances at AUX Connector,
cable pinouts. The Control Carrier AUX connector outputs include:
•
Alarm monitoring for the auxiliary cabinet
•
Seven -48 VDC power sources for emergency transfer units
•
Three -48 VDC power sources for remotely powering three attendant consoles or telephone
adjuncts
•
The remote management terminal interface trunk connection location
•
A relay contact that actuates a customer-supplied light, bell, or similar device. The relay can
activate when a major, minor, or warning condition occurs. The device connected to the alarm
leads must not exceed a rating of 30 VAC rms or 60 VDC at 0l75 amps.
Table 21
Table 22, Port Circuit Pack and Telephone Pin Designations,
telephone pin designations.
510
Lead Pin
Designation Number
L I * (High Side) 47
L I
22
LO 48
LO* (High Side) 23
LBACK2 49
LBACK1 24
shows the pinouts for an external alarm.
on page 511 shows the Control Carrier outputs
on page 513 provides port circuit pack and
SI Installation and Upgrades
June 2004