Avaya MCC1 Installation And Upgrades page 722

Upgrade Firmware on Programmable Circuit Packs
Self and C-LAN-distributed download Procedure
Table 31: Firmware Download fields and descriptions
Field
Suffix
Firmware
Vintage
Schedule
Download
Remove Image
File After
Successful
Download
722
Description
Examples:
•
For VAL (TN2501AP),
type AP.
•
For C-LAN
(TN799DP), type DP.
•
For DS1 (TN464GP),
type GP.
This is blank. It shows a value
in the Firmware Download
form of a
display firmware
download or a status firmware
download .
Type y to schedule the
firmware download for another
time.
Type n to start the firmware
download immediately after
completing the form.
Type y if you want the
procedure to automatically
remove the new firmware
image file [default].
Type n if you do not want the
new firmware image file
removed.
Notes
Once the firmware download begins,
you cannot make any changes to this
form. You can only disable this
schedule using disable firmware
download and then start a new one.
(See Aborting a firmware download
on page 727 for instructions.)
If you answer n(o), then the Start
Date/Time and Stop
Date/Time fields disappear. The
download begins as soon as you
press Enter.
At the completion of a successful
download, the procedure
automatically removes the new
firmware image file from the source
file system, freeing up the memory
on the source circuit pack. We
recommend using the default setting.
If field is set to n, you must
manually remove the new firmware
image file from the source file
system after the download has
completed. (See Disable file system
on page 727 for instructions.)
SI Installation and Upgrades
2 of 3
June 2004