Install Additional Hardware; Task List: Installing Additional Port Circuit Packs - Avaya MCC1 Installation And Upgrades

Install Additional Hardware

This section provides information about and procedures for installing additional port circuit packs and
other equipment to add more functionality to the DEFINITY ECS.
For procedures to install Avaya Media Gateways (IP) solutions, see
For procedures to install channel service units (CSUs) see
For procedures to install trunks, see
For procedures to upgrade firmware, see
715.
Avaya Media Gateways do not require an external modem because an internal modem is in the processor
circuit pack. For procedures to install modems, see

Task List: Installing Additional Port Circuit Packs

If adding the packet bus support and TN570Ds must be installed as part of that support, adding
ISDN—BRI requires a service interruption. Notify the customer in advance as to when the addition will
be carried out. See
Select the information you need:
•
Add Port Circuit Packs
•
Install and Administer ISDN - BRI
•
Add a TN2501AP Announcement Circuit Pack
•
Add Multiple Announcement
•
Add Speech Synthesis
•
Add Code Calling Access
•
Add CallVisor ASAI
•
Add Packet Bus Support
•
Add DCS Interface
•
Administer TN464GP/TN2464BP with Echo Cancellation
SI Installation and Upgrades
June 2004
Install and Administer Trunks
Upgrade Firmware on Programmable Circuit Packs
Add Packet Bus Support on page 588 for further information.
on page 567
on page 570
on page 580
on page 584
on page 584
on page 584
on page 588
on page 593
Install Additional Hardware
Task List: Installing Additional Port Circuit Packs
Add IP Solutions
Add Channel Service Units
on page 657.
Install and Connect Modems
on page 578
on page 598
on page 601.
on page 651.
on page
on page 701.
565