New Duplicated G3R Installations Only; New Simplex And Upgraded G3R Only - Avaya MCC1 Installation And Upgrades

Install Additional Hardware
Task List: Add DCS
The TN799x C-LAN circuit pack is now installed in the DEFINITY carrier and connected to the IP
network.
Return to Task List
Deliver License File (Add DCS)
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.

New Duplicated G3r installations only

1
Retrieve the RFA License File with both serial numbers from the RFA Application.
2
Type
set time
Ensure that the system date and time are set correctly.
3
Use one of these installation methods:
— Direct connection between the switch and RFA
— No connection between the switch and RFA
4
Type save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
5
Type
reset system 4
Wait until the system has completely reset before continuing.
6
Type change cabinet 1
In the Carrier Type column change the "B" carrier to processor and submit the form.
7
Type change system-parameters duplication
Set the Enable Operation of SPE Duplication field to y and submit the form.
8
Type save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
9
Type reset system 3 preserve-license
License File has been saved in translations) and press Enter.

New simplex and upgraded G3r only

1
Type save translation
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
2
Type
reset system 3
Wait until the system has completely reset before continuing.
596
and press Enter.
and press Enter.
and press Enter.
and press Enter.
and press Enter.
(or
and press Enter.
and press Enter.
and press Enter.
reset system 3 no-preserve-license
SI Installation and Upgrades
, since the
June 2004