Prepare For Download; Verify Hardware/Software Requirements - Avaya MCC1 Installation And Upgrades

5
Monitor download progress
6
Reseat VAL circuit pack
7
Disable file system
NOTE:
If you have any trouble with this procedure, refer to
on page 727.

Prepare for download

The following subsections contain procedures to prepare for the firmware downloads to target circuit
packs:
•

Verify hardware/software requirements

•
Get circuit pack information
•
Set up source circuit pack's file system
Verify hardware/software requirements
Make sure you know which download procedure to use and that you have all the hardware and software
that is necessary to proceed.
•
Given the type of target circuit pack to be upgraded, choose an appropriate source circuit pack
from the following table
column indicates which download method must be used with the target and chosen source.
Table 30: Download Method by Circuit Pack
Target Circuit Pack(s)
TN464GP, TN2464BP, and TN2313AP
(UDS1)
TN2214CP or TN2224CP (DIG-LINE)
TN771DP (Maintenance/Test)
TN2302AP (IP Media Processor)
TN799DP (C-LAN)
TN2501AP (VAL)
1 For TN2302AP circuit packs with a vintage less than 22, a different download procedure is required that
is not described here. Go to the Avaya Support Web site under Software & Firmware Downloads,
DEFINITY ECS, TN2302AP firmware downloads. On the page titled "Retired - (OLD Do Not Use)
DEFINITY Firmware Downloads", scroll down to the TN2302AP section and click on
TFTP_Firmware_download_procedure.pdf.
SI Installation and Upgrades
June 2004
Upgrade Firmware on Programmable Circuit Packs
on page 725
on page 726
on page 727
on page 717
on page 718
on page 719
(Table 30, Download Method by Circuit Pack,
Source Circuit Pack
TN799C or TN799DP
TN799C or TN799DP
TN799C or TN799DP
1
TN799C or TN799DP
TN799DP
TN2501AP
Self and C-LAN-distributed download Procedure
Troubleshooting firmware downloads
on page 717). The last
Download Method
C-LAN-distributed
C-LAN-distributed
C-LAN-distributed
C-LAN-distributed
Self
Self
717