Avaya MCC1 Installation And Upgrades page 295

Auxiliary lead appearances for System 75, G1, and G3
Color 66-type
conn
block
term
V-BR 47
BR-V 48
V-S 49
S-V 50
These leads are not available on DEFINITY G1 or later systems. If you are upgrading a System 75 and these leads
were previously used, these alarm connections have to be dropped.
Return to Task List
Label cables [75 small upgrade]
Return to Task List
1
To make reconnecting the cables simpler and more reliable, label every reusable connector cable
in the system.
2
Install new connector cables, as needed, onto the connectors at the rear of the cabinet.
3
Route the cables to the MDF and cross-connect as needed.
4
Return to Task List
Shut down DEFINITY AUDIX system [75 small upgrade]
Return to Task List
A yellow caution sticker on the system's power unit notifies you to shut down the AUDIX before
powering down the system.
!
Neglecting to shut down an AUDIX assembly before powering down the system cabinet
where it resides can damage the AUDIX disk.
1
Log into the AUDIX as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password.
2
Type
reset system shutdown
3
Press Enter again to start the shutdown.
SI Installation and Upgrades
June 2004
Multi-carrrier AUX
conn outputs
N/C
INADS
WARNING:
and press Enter.
System 75 Small-Cabinet to R8si (Blowback)
Task List: System 75 Small Cabinet to R8si
Single-carrrier 808A
AUX conn outputs emerg
xfer unit
outputs
N/C N/C
INADS GND
-48
574-5
power
xfer unit
outputs
N/C
GND
-48
295