Packet filter commands
clear ipv6 packet-filter statistics
Use this command to clear the IPv6 packet filter statistics for an interface.
Syntax
clear ipv6 packet-filter statistics {<interface-name> | all}
Example
AG# clear ipv6 packet-filter statistics ethernet0/3
configure ip packet-filter
Use this command to configure the IPv4 packet filter.
Syntax
ip packet-filter <packet-filter-name>
Table 287: Variable definitions
Variable
<packet-filter-name>
Example
AG/configure# ip packet-filter ipfilter1
configure ip packet-filter add|insert
Use this command to configure the IPv4 packet filter rules.
Syntax
[no] {add | insert <lineno>} {permit | deny} {tcp | udp | icmp | ipv6
| <0-255>} <src-address> <dst-address> [sport <src-port>] [dport
<dst-port>] [icmptype <icmp-type>] [icmpcode <icmp-code>] [dscp
<dscp-value>] [flowlabel <flowlabel-value>] [flags <tcp-flags>]
[routing {on|off}] [log {on|off}] [expire <expiry-time>]
Table 288: Variable definitions
Variable
266
Command Line Reference
Value
name of the packet filter.
Value
Comments? infodev@avaya.com
August 2013