Add Callvisor Asai - Avaya CMC1 Installation, Upgrades And Additions

Adding or Removing Hardware
Test the Packet Bus and C-LAN Circuit Pack
1. Type test packet port-network 1 long and press
detail about these tests, refer to the test pkt command section in the
Maintenance for Avaya DEFINITY Server CSI.
Resolve Alarms
1. Examine the alarm log. Resolve any alarms using Maintenance for Avaya
DEFINITY Server CSI.
Enable Alarm Origination to INADS
1. Ask the regional Customer Software Administration to complete the
Customer Options''
for telephone numbers.
Verify Customer Options
1. Type display system-parameters customer-options and press
Ensure that the G3 version field is V11.
2. If the customer was using Supplementary Services Protocol b or d on an
ISDN-PRI trunk group before the upgrade, go to the QSIG Optional
Features screen and ensure that the Basic Call Setup field is y.

Add CallVisor ASAI

Enter Added Translations
1. On the System-Parameters Customer-Options screen, disable the Calling
Party Number/Billing Number (CPN/BN) option, and enable the CallVisor
ASAI Interface option.
2. Enable the Packet Bus Activated option on the System-Parameters
Maintenance screen.
3. See Administrator's Guide for Avaya MultiVantage Software for details on
disabling and enabling these options.
5-44
Issue 5 October 2002
steps. See
NOTE:
As part of the system registration process, the INADS Database
Administrator enables Alarm Origination and customer options.
Enter
''Where to get additional help'' on page -xii
. For more
''Verify
Enter.
555-233-118