Switchport General Acceptable-Frame-Type Tagged-Only - Alcatel OS-LS-6224 User Manual

Example
The following example disables port ingress filtering on Ethernet port 1/e16.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general ingress-filtering disable
Related Commands
switchport mode
switchport access vlan
switchport trunk allowed vlan
switchport trunk native vlan
switchport general allowed vlan
switchport general pvid

switchport general acceptable-frame-type tagged-only

switchport forbidden vlan
show interfaces switchport
switchport access multicast-tv vlan
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface
Configuration mode command discards untagged frames at ingress. To return to the
default configuration, use the no form of this command.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Setting
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/e16 to discard untagged frames at
ingress.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general acceptable-frame-type tagged-only
4
VLAN Commands
687